Product Overview
The elastic connecting rod vibrating conveyor is a device that relies on vibration to achieve continuous material conveying. It can be used for conveying various loose materials under horizontal and gently inclined working conditions. During the conveying process, it can perform multi-point feeding and multi-point discharging, and can also simultaneously complete various process operations such as screening, drying, dewatering, cooling, and mixing.
The equipment operates smoothly and reliably, featuring low frequency and large amplitude operating characteristics, especially suitable for large conveying capacity and long-distance material conveying scenarios. It is suitable for conveying block, granular, and powdery materials, but not suitable for conveying sticky and wet materials. The body adopts a sealed trough structure, and the conveying process is enclosed and environmentally friendly with no dust leakage, especially suitable for conveying materials with large dust content and harmful components.
Structural Composition
It consists of a conveying trough body, frame, vibration isolation springs, main vibration springs, motor, V-belts, pulleys, eccentric shaft (crank), drive connecting rod, drive rubber springs, and support swing rods.
Working Principle
When the motor drives the eccentric shaft (crank) to rotate through the V-belt pulley, the drive connecting rod and rubber springs drive the trough body to achieve linear reciprocating motion (linear vibration), thereby driving the material forward in a directional throwing motion to achieve conveying.
Technical Parameters
| Model | 300 | 400 | 600 | 800 |
| Single Machine Conveying Distance (m) | 5-25 | 8-25 | ||
| Conveying Capacity (t/h) | ≤15 | ≤25 | ≤40 | ≤60 |
| Motor Power (kW) | 3~7.5 | 5.5~15 | ||
| Reference Weight per Meter (kg/m) | 300 | 500 | 700 | 800 |
| Material Properties Particle Size (mm) | 0.5<D<100 | 0.5<D<200 | ||
| Material Properties Temperature (°C) | <300 | |||
| Material Moisture Content and Viscosity | Non-sticky, non-flammable, non-explosive materials with moisture content less than 5% | |||
keywords：
Elastic Connecting Rod Vibrating Conveyor
Application scenarios
Provide full industry chain services for various industries
Our products are widely used in various industries such as mining, metallurgy, carbon new materials, chemical industry, coal, water treatment, sludge treatment, oil sludge (sand) treatment, gas engineering, soil remediation, on-site treatment of construction waste, coal-fired power, building materials, steel, cement, electricity, grain, sand making, commercial concrete, environmental protection, refractory materials, etc
Electricity
Building materials
Chemical industry
Grain
Mine
Sand Making
Cement
Coal
Elastic Connecting Rod Vibrating Conveyor
Contact Information
Category
After-sales service
Each process is inspected layer by layer, and the factory quality is strictly controlled; Equipped with a dedicated on-site installation guidance and after-sales maintenance service team, we can provide customers with one-stop landing services.
Professional after-sales team
Follow up throughout the process, provide on-site guidance on equipment installation and debugging, and quickly complete production.
Equipment malfunction repair
Timely response, on-site troubleshooting, and efficient resolution of operational failures.
Full process quality traceability control
Factory level quality inspection reduces the occurrence rate of after-sales failures from the source.
Information exchange
Fault issues can be addressed through collaborative research and development to provide targeted solutions
Industry university research technology
We can provide professional technical guidance for equipment modification and process optimization.
Stable technical support
Explanation of maintenance knowledge for supporting equipment to extend its service life.
Related Products
Belt conveyors feature strong conveying capacity, long conveying distance, simple structure, easy maintenance, and convenient automated operation. They are used for conveying various bulk materials.
DJ Type Large Angle Belt Conveyor
The large angle belt conveyor uses a conveyor belt with corrugated sidewalls and transverse partitions. It is suitable for continuous conveying of bulk materials at an inclination angle of 0° to 90° (70° or less is optimal).
Screw conveyors are mainly used for horizontal or inclined conveying of powdery, granular, and small block materials, such as coal, ash, slag, cement, grain, etc. They are not suitable for conveying materials that are prone to deterioration, sticky, or easily caked, nor materials that cannot be crushed during conveying.
The tube chain conveyor is a mechanical system that operates inside a sealed pipe. It features stable performance, energy saving, environmental protection, and sealing in the conveying system.
Online Inquiry
* Our team will get back to you promptly. For immediate assistance, feel free to call us directly.