Product Overview
The scale bucket conveyor features large conveying capacity and strong impact resistance. It is widely used in carbon paste and boiler dry slag conveying and cooling comprehensive treatment systems, especially in dry slag discharge or material conveying systems with large output, large inclination, long distance, and efficient cooling. According to the properties of the conveyed materials, buckets are available in carbon steel, stainless steel, nylon, spray-coated plastic steel, enamel, and other categories. Bucket widths are available in five common specifications: 350mm, 450mm, 630mm, 800mm, and 1000mm. According to different operating occasions and environmental requirements, the equipment structure is available in open type, semi-enclosed type, and fully enclosed type.
Technical Parameters
| Specification Model | Bucket Width (mm) | Chain Speed Range (m/min) | Conveying Capacity (m³/h) B≤20° | 20°<B≤40° | 40°<B≤60° |
| LD350 | 350 | 3.5-17.5 | 14-70 | 7-35 | 5月25日 |
| LD450 | 450 | 3.5-17.5 | 18-90 | 9-45 | 6月30日 |
| LD630 | 630 | 3.5-17.5 | 24-120 | 12-60 | 9-45 |
| LD800 | 800 | 3.5-17.5 | 32-160 | 16-80 | 11-55 |
| LD1000 | 1000 | 3.5-17.5 | 40-200 | 20-100 | 14-70 |
keywords：
LD Type Scale Bucket Conveyor
Application scenarios
Provide full industry chain services for various industries
Our products are widely used in various industries such as mining, metallurgy, carbon new materials, chemical industry, coal, water treatment, sludge treatment, oil sludge (sand) treatment, gas engineering, soil remediation, on-site treatment of construction waste, coal-fired power, building materials, steel, cement, electricity, grain, sand making, commercial concrete, environmental protection, refractory materials, etc
Electricity
Building materials
Chemical industry
Grain
Mine
Sand Making
Cement
Coal
LD Type Scale Bucket Conveyor
Contact Information
Category
After-sales service
Each process is inspected layer by layer, and the factory quality is strictly controlled; Equipped with a dedicated on-site installation guidance and after-sales maintenance service team, we can provide customers with one-stop landing services.
Professional after-sales team
Follow up throughout the process, provide on-site guidance on equipment installation and debugging, and quickly complete production.
Equipment malfunction repair
Timely response, on-site troubleshooting, and efficient resolution of operational failures.
Full process quality traceability control
Factory level quality inspection reduces the occurrence rate of after-sales failures from the source.
Information exchange
Fault issues can be addressed through collaborative research and development to provide targeted solutions
Industry university research technology
We can provide professional technical guidance for equipment modification and process optimization.
Stable technical support
Explanation of maintenance knowledge for supporting equipment to extend its service life.
Related Products
Belt conveyors feature strong conveying capacity, long conveying distance, simple structure, easy maintenance, and convenient automated operation. They are used for conveying various bulk materials.
DJ Type Large Angle Belt Conveyor
The large angle belt conveyor uses a conveyor belt with corrugated sidewalls and transverse partitions. It is suitable for continuous conveying of bulk materials at an inclination angle of 0° to 90° (70° or less is optimal).
Screw conveyors are mainly used for horizontal or inclined conveying of powdery, granular, and small block materials, such as coal, ash, slag, cement, grain, etc. They are not suitable for conveying materials that are prone to deterioration, sticky, or easily caked, nor materials that cannot be crushed during conveying.
The tube chain conveyor is a mechanical system that operates inside a sealed pipe. It features stable performance, energy saving, environmental protection, and sealing in the conveying system.
Online Inquiry
* Our team will get back to you promptly. For immediate assistance, feel free to call us directly.