TD-type bucket elevator
TD-type bucket elevator
TD-type bucket elevator
TD-type bucket elevator
TD-type bucket elevator
+
  • TD-type bucket elevator
  • TD-type bucket elevator
  • TD-type bucket elevator
  • TD-type bucket elevator
  • TD-type bucket elevator

Product Overview

TD‑type bucket elevators (belt‑type bucket elevators) are suitable for the vertical conveyance of powdery, granular, and small lump materials with low abrasiveness, such as grain, coal, cement, and crushed ore. The TD series bucket elevators feature a simple structure, smooth operation, scoop‑type loading, and centrifugal‑gravity discharge, with a maximum material temperature not exceeding 60°C. The TD‑type bucket elevator is available with four types of buckets: Q‑type (shallow bucket), H‑type (curved‑bottom bucket), ZD‑type (medium‑deep bucket), and SD‑type (deep bucket).

Basic Structure

The TD bucket elevator consists of a running section (buckets and traction belt), an upper section with a drive drum, a lower section with a tension drum, an intermediate casing, a drive unit, and an anti‑backdrive braking device. It is suitable for vertically conveying loose, non‑abrasive or mildly abrasive bulk materials—such as coal, sand, coke fines, cement, and crushed ore—with a bulk density of 1.5 t/m³ in powder, granular, or small lump form.

Key features: wide lifting range, excellent sealing, and minimal environmental pollution. It employs inflow feeding and induced discharge, ensuring smooth and reliable operation.

Technical Specifications Table

Model number TD160 TD250 TD315 TD400

Hopper

Form

Q H ZD SD Q H ZD SD Q H ZD SD Q H ZD SD
Conveying capacity (m 3 /h) 9 16 16 27 20 36 38 59 28 50 42 67 40 76 68 110
Tread width (mm) 160 250 315 400
Hopper Capacity (L) 0.5 0.9 1.2 1.9 1.12 2.24 3.0 4.6 1.95 3.55 3.75 5.8 3.1 5.6 5.9 9.4
Stem spacing (mm) 280 350 360 450 400 500 480 560
Bandwidth (mm) 200 300 400 500
Race speed (m/s) 1.4 1.6 1.6 1.8
Drum rotational speed r/min 67 61 61 55
Maximum material size (mm) 25 35 45 55
Model number TD500 TD630

Hopper

Form

Q H ZD SD H ZD SD
Conveying capacity (m 3 /h) 63 116 96 154 142 148 238
Tread width (mm) 500 630
Hopper Capacity (L) 4.84 9 9.3 14.9 14 14.6 23.5
Stem spacing (mm) 500 625 710
Bandwidth (mm) 600 700
Race speed (m/s) 1.8 2.0
Drum rotational speed r/min 55 48
Maximum material size (mm) 60 70

Note: The bucket capacities listed in the table are calculated values, and the conveying capacity is determined based on a filling factor of 0.6. Bucket types for bucket elevators are as follows: Shallow buckets are used for conveying moist, easily caking, and difficult-to-discharge materials, such as wet sand and wet coal. Deep buckets are used for conveying dry, loose, and readily dischargeable materials, such as cement, coal lumps, crushed stone, and quartz sand.

★ Tongxin Vibration Machinery can design and manufacture bucket elevators of special models and specifications according to customer requirements.
★ Tongxin Vibration Machinery reserves the right to modify all technical documentation and dimensions. In the event of any discrepancy between the actual product and the illustrations in this document, the actual product shall prevail, and Tongxin Company retains final interpretive authority.

keywords:

TD-type bucket elevator

Application scenarios

Provide full industry chain services for various industries

Our products are widely used in various industries such as mining, metallurgy, carbon new materials, chemical industry, coal, water treatment, sludge treatment, oil sludge (sand) treatment, gas engineering, soil remediation, on-site treatment of construction waste, coal-fired power, building materials, steel, cement, electricity, grain, sand making, commercial concrete, environmental protection, refractory materials, etc

Electricity

Electricity

Building materials

Building materials

Chemical industry

Chemical industry

Grain

Grain

Mine

Mine

Sand Making

Sand Making

Cement

Cement

Coal

Coal

TD-type bucket elevator
TD-type bucket elevator
TD-type bucket elevator
TD-type bucket elevator
TD-type bucket elevator
+
  • TD-type bucket elevator
  • TD-type bucket elevator
  • TD-type bucket elevator
  • TD-type bucket elevator
  • TD-type bucket elevator

TD-type bucket elevator

TD-type bucket elevators (belt‑type bucket elevators) are suitable for the vertical conveyance of powdery, granular, and small lump materials with low abrasiveness, such as grain, coal, cement, and crushed ore.


Product inquiry

Note: Please leave your phone number or email address, and our professionals will contact you as soon as possible!

Submit

After-sales service

Each process is inspected layer by layer, and the factory quality is strictly controlled; Equipped with a dedicated on-site installation guidance and after-sales maintenance service team, we can provide customers with one-stop landing services.

Professional after-sales team

Follow up throughout the process, provide on-site guidance on equipment installation and debugging, and quickly complete production.

Equipment malfunction repair

Timely response, on-site troubleshooting, and efficient resolution of operational failures.

Full process quality traceability control

Factory level quality inspection reduces the occurrence rate of after-sales failures from the source.

Information exchange

Fault issues can be addressed through collaborative research and development to provide targeted solutions

Industry university research technology

We can provide professional technical guidance for equipment modification and process optimization.

Stable technical support

Explanation of maintenance knowledge for supporting equipment to extend its service life.

Related Products

Oil sludge treatment system

The oil‑containing sludge (oil‑sludge sand) cleaning and separation device, developed and manufactured by Xinxiang Tongxin Vibration Machinery Co., Ltd., is ready for industrial-scale application.

Sand and gravel production line

The aggregate production line is a complete set of equipment for producing construction sand, crushed stone, and stone powder.

Airflow classification station

Intelligent Crushing Cyclone Classification Station and Airflow Crushing Classification Station, featuring remote/local control capability. Welcome to inquire and place orders!

Coal transportation system production line equipment

The coal feeding system (coal conveying system) auxiliary equipment manufactured by Tongxin Vibrating Machinery mainly includes crushers, vibrating screens, belt conveyors, large‑angle belt conveyors, coal feeders, vibrating feeders, star‑type dischargers (rigid impeller feeders), storage bins, bin wall vibrators, slide gate valves, and other equipment.

< 1234...8 >