Contact Us
Telephone/Whatsapp:
Email: txinfo2007@gmail.com
Product Center
The circular vibrating screen uses an eccentric shaft as the excitation source. As the motor drives the eccentric shaft to rotate, it induces the screen to perform a circular motion—upward, forward, downward, and backward—ensuring that the material being screened flows uniformly and rapidly across the screen mesh, thereby completing the screening process.
Mining vibrating screens are mainly used in metallurgy, mining, coal, building materials, electric power, and chemical industries. They are common screening equipment under blast furnace troughs, in coking plants, and in beneficiation plants.
L-shaped bucket elevator with a scoop-type receiving hopper
The bucket‑type lift for the sump is primarily used in coal washing and coal preparation plants to convey washed coal and gangue from the lower section of the jig; alternatively, it can be employed to lift coarse‑grained clean coal and fine‑grained coal from the sump’s sedimentation tank, enabling the lifted material to undergo gravity‑driven dewatering within the buckets during the lifting process.
Steel Wire Belt Bucket Elevator
Wire‑rope‑core belt bucket elevators feature high conveying capacity, compact dimensions, low power consumption, smooth and reliable operation, and a long service life.
The NE series plate chain bucket elevator is suitable for vertical conveying of medium to large block and abrasive materials (such as fly ash, limestone, cement clinker, gypsum, lump coal, crushed stone, slag, etc.), with a material temperature below 250°C.
The NSE series high-speed plate chain bucket elevator is widely used for lifting powdery and small granular materials. It is available in six basic models: NSE100, NSE200, NSE300, NSE400, NSE500, and NSE600. Each model offers different lifting speeds depending on the material being conveyed.
The TH-type bucket elevator with a chain is suitable for the vertical conveyance of powdery, granular, and small lump materials that are either non-abrasive or only mildly abrasive.
TH-type bucket elevator with chain drive
The TH-type bucket elevator is suitable for the vertical conveyance of powdery, granular, and small lump materials that are either non-abrasive or only mildly abrasive.
TD-type bucket elevators (belt‑type bucket elevators) are suitable for the vertical conveyance of powdery, granular, and small lump materials with low abrasiveness, such as grain, coal, cement, and crushed ore.
K-type reciprocating coal feeder
The K-type reciprocating coal feeder is used for feeding coal or other loose granular materials with low abrasiveness and low stickiness, continuously and uniformly discharging material from storage bins or hoppers into conveying equipment or other screening devices.
The apron feeder is a widely used continuous conveying machine in industries such as mining, metallurgy, coal, chemical processing, building materials, and foundry. It is particularly well suited for handling solid materials that are high‑temperature, large‑sized, sharply edged, and highly abrasive.
Electromagnetic Vibrating Feeder
The GZ series electromagnetic vibrating feeder is widely used in industries such as mining, metallurgy, coal, building materials, chemical processing, power generation, and grain handling. It is designed to feed lump, granular, and powdered materials uniformly, continuously, or in measured quantities from storage bins or other receiving equipment into downstream processing units.
GZG Series Motor Vibrating Feeder is a commonly used new type of vibrating feeding equipment, widely applied in industries such as mining, metallurgy, coal, building materials, chemical, electric power, and grain.
Baghouse dust collectors are widely used in industries such as metallurgy, mining, machinery, cement, building materials, grain, pharmaceuticals, light industry, and electric power, for capturing fine, dry, non‑fibrous dust.
Online Inquiry
*Please keep your phone open. We can contact you immediately or call us directly
WhatsApp